## **Materials Needed**
| **Materials** | **Description** | **Optional** |
| — | — | — |
| Compost or Vermicompost | Source of humus for carbon | |
| Powdered Aloe | Aids in nutrient absorption | |
| Coconut Powder | Provides essential nutrients | |
| Quilaja Saponaria (Liquid or Powder) | Natural wetting agent | * |
| PowerSI | Silicon supplement for plant strength | * |
| Lalstim Osmo (Glycine Betaine) | Enhances osmotic adjustment | * |
| Nitrogen Source (Compost or Bat Guano) | Essential for plant growth | |
| Kelp and Molasses | Microbe food source | |
| 12-inch Pond Nano Atomizer | For oxygenation | |
| 5-gallon Bucket | Mixing and storage container | |
| Waterproof Sealant | For securing the atomizer | |
| Air Pump | For powering the atomizer | |
| Step Stool | For supporting the bucket | |
| Water Pump | For creating a water vortex | * |
| BuildASoil Powdered Super Soil Mix | Comprehensive soil amendment | |
## **Procedure**
1. **Prepare the 5-gallon bucket**: Cut a hole in the bottom of the bucket to attach the air pump. Ensure the hole is large enough for the pump’s tubing but small enough to create a tight seal.
2. **Install the Pond Nano Atomizer**: Place the 12-inch pond nano atomizer at the bottom of the bucket. Secure it using the waterproof sealant to prevent any leaks.
3. **Set up the Air Pump**: Connect the air pump to the atomizer through the hole you cut in the bucket. Place the bucket on a step stool with a gap in the center so it can sit up straight.
4. **Prepare the Nutrient Mixture**: In a separate container, combine the compost (or vermicompost), powdered aloe, coconut powder, quilaja saponaria*, PowerSI*, and Lalstim Osmo*. Mix thoroughly until all components are well integrated.
5. **Add the Nitrogen Source**: Incorporate your chosen nitrogen source, either compost or bat guano, into the mixture. Stir well to ensure even distribution.
6. **Incorporate Microbe Food**: Add kelp and molasses to the mixture. These ingredients will serve as a food source for the beneficial microbes present in the compost or vermicompost.
7. **Add the Super Soil Mix**: Incorporate the BuildASoil Powdered Super Soil Mix into the nutrient mixture. This mix is based on a farmer’s recipe and provides a comprehensive range of nutrients and minerals.
8. **Transfer the Mixture to the Bucket**: Carefully pour the nutrient mixture into the 5-gallon bucket.
9. **Activate the Air Pump**: Turn on the air pump to start the oxygenation process. The atomizer will produce bubbles smaller than 10 nanometers, ensuring the entire volume of water is being oxygenated.
10. **Install and Activate the Water Pump***: If you’ve chosen to use a water pump, install it in the bucket and direct the water outlet tangentially to create a vortex. Start the pump at a low speed and gradually increase it until a vortex forms.
11. **Allow the Mixture to Steep**: Let the mixture steep for anywhere from 1 to 24 hours. This will allow the nutrients to fully dissolve and the beneficial microbes to multiply.
12. **Use the Potion**: After steeping, the nutrient uptake potion is ready to use. Apply it to your plants as needed.
Items marked with an asterisk (*) are optional add-ons and not necessary for the basic functioning of the nutrient uptake potion. However, they can enhance the effectiveness of the potion and may be worth considering depending on your specific needs and circumstances.